SMART MX 04 - Multi Satellite Search

Installation
Smart MX 04 EN 27
Network Search
Ö Select the menu point Network Search in menu Single Satellite Search
on page 26. This menu point is only active when you have selected
Preset Sc
an.
Ö If you want to search with network search, then select Yes.
Ö Otherwise select No.
Scan Mode
Ö Select the menu point Scan Mode in menu Single Satellite Search on
page 26.
Ö
Select the search mode Preset Scan or Blind Search.
Search
Ö Select the menu point Search in menu Single Satellite Search on
page 26.
Ö Press
OK to start the search run.
Multi Satellite Search
To search channels on several satellites, go to the menu Installation on
page 22.
Ö
Select the menu point Multi Satellite Search.
Ö Confirm
with OK. At the bottom of the menu you can see the satellites on
whi
ch the channels will be searched.
Ö For leaving the menu, press EXIT once or repeatedly.
Satellite
Ö Select the menu point Satellite in menu Multi Satellite Search.
Ö To confirm press OK.
Ö
Select a satellite from the list.
Ö To confirm press OK.
Scan Channel
Ö Select the menu point Scan Channel in menu Multi Satellite Search on
page 27.
Ö
If you only want to search for TV channels, then select TV Channels.
Ö If you want to search for radio channels, then select Radio.
Ö If you want to search for TV and radio channels, then select TV + Radio.