SMART MX 04 - Menu Lock; Channel Lock

System Setup
Smart MX 04 EN 39
To change the setting of Parental Lock, go to the menu System Setup – see
on page 29.
Ö
Select the menu point Parental Lock.
Ö To confirm press OK.
Ö
Insert the code (see page 18).
Ö
For leaving the menu, press EXIT once or repeatedly.
Menu Lock
Ö Select the menu point Menu Lock in the menu Parental Lock.
Ö Select On if you want to lock some menus.
Ö Select Off if all settings shall be free accessible. Only exception: the menu
Parental Lock can only be opened after inserting the code.
Ö For leaving the menu, press EXIT once or repeatedly.
Channel Lock
Ö Select the menu point Channel Lock in the menu Parental Lock.
Ö Select On if you want to lock some channels.
Ö Select Off if all settings shall be free accessible. Only exception: the menu
Parental Lock can only be opened after inserting the code.
Ö For leaving the menu, press EXIT once or repeatedly.
New Password
Ö Select the menu point New Password in the menu Parental Lock.
Ö Insert a new code with the Numeric buttons (0~9).
Ö
Repeat the new code under confirm password.
Ö You will see the message Change password successfully! Confirm the
new code with the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Note!
When the new code is inserted and confirmed, there is no
possibility to revoke or cancel the code change.