SMART MX 04 - Aspect Mode; Video Output

System Setup
32 EN Smart MX 04
Ö Select the adequate color TV norm for your system with the VOL (+/-)
buttons.
To be available are following norms
• PAL
• PAL-M
• PAL-N
• NTSC
• Auto
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Aspect Mode
To change the screen format, go to the menu System Setup - see on
page 29.
Ö
Select the menu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point Aspect Mode.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the adequate screen format for
your TV-Set.
To be available are:
• 4:3 PanScan
• 4:3 Letter Box
• 16:9
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Video Output
To change the format of the video signal, go to the menu System Setup – see
on page 29.
Ö
Select the menu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point Video Output.
Ö Select the video output format with VOL (+/-).
To be availab
le are:
• RGB
• CVBS