SMART MX 04 User Manual

Installation
28 EN Smart MX 04
Network Search
Ö Select the menu point Network Search in menu Multi Satellite Search
on page 27. This menu point is only active when you have selected
Preset Sc
an.
Ö If you want to search with network search, then select Yes.
Ö Otherwise select No.
Scan Mode
Ö Select the menu point Scan Mode in menu Multi Satellite Search on
page 27.
Ö
Select the search mode Preset Scan or Blind Search.
Search
Ö Select the menu point Search in menu Multi Satellite Search on page 27
Ö Press OK to start the search run.
TP List
To select the transponder list, go to the menu Installation on page 22.
Ö Select the menu point TP List.
Ö To confirm press OK.
Ö
To edit the TP List, press Find.
Ö
To add a transponder, press ZOOM.
Ö
To delete a transponder, press TXT.
Ö
To search a transponder, press Audio.
Ö
For leaving the menu, press EXIT once or repeatedly.

SMART MX 04 Specifications

General

Brand	SMART
Model	MX 04
Category	Receiver
Language	English