SMART MX 04 - Operation With The Remote Control; Remote Control Basics

Operation With The Remote Control
58 EN Smart MX 04
Operation With The Remote Control
Switch The Receiver On And Off
Press the Standby button to switch the receiver on and off.
Change The Volume
Change the volume with the VOL (+/-) buttons.
Change The Channel
Press Numeric buttons (0~9) for the channel number. To change the channel
in ascending or descending order you can also press the PR (+/-) buttons.
Teletext
For teletext press the TXT button.
The teletext shows news and information about the program.
To exit the teletext, press EXIT.