SMART MX 04 - Timer Service

System Setup
36 EN Smart MX 04
Ö Go to Cancel for not saving the settings and press the OK button.
Ö For leaving the menu, press EXIT once or repeatedly.
Timer Service
To select the service for the timer, go to the menu System Setup – see on
page 29.
Ö
Select the menu point Timer Setting.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Timer Service.
Ö Select the service.
To be available are:
• Channel
• Message
Ö Go to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Wakeup Channel
You can only choose a channel if the setting in menu point Timer Service,
(see page 36) is set on ch
annel.
Ö Go to the menu System Setup –
see on page 29.
Ö Select the menu point Timer Setting.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Wakeup Channel.
Ö To confirm press OK.
Ö
Select the channel.
Ö To confirm press OK.
Ö Go
to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.