SMART MX 04 - Page 37

System Setup
Smart MX 04 EN 37
Wakeup Message
You can only chose the message if the setting in the menu point Timer
Service (see page 36) is no
tice.
To chose a message, go to the menu System Setup – see o
n page 29.
Ö Select the menu point Timer Setting.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Wakeup Message.
Ö To confirm press OK.
Ö
Select the kind of notice.
To be available are:
• Birthday
• Anniversary
• General
Ö Go to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
Wakeup Date
To select the wakeup date, go to the menu System Setup – see on page 29.
Ö Select the menu point Timer Setting.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.
Ö To confirm press OK.
Ö
Select the menu point Wakeup Date.
Ö Insert the date.
Ö Go to Save to safe your settings and press the OK button.
Ö Go
to Cancel for not saving the settings and press the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
On Time
To select the start-up time, go to the menu System Setup – see on page 29.
Ö Select the menu point Timer Setting.
Ö To confirm press OK.
Ö
Select the timer which you want to change or program.