System Setup
Smart MX 04 EN 29
System Setup
Ö Press MENU.
Ö Select the menu point System Setup.
Ö
To confirm press OK.
Language
Figure 8: menu for language settings
Language
The menu language is set when the receiver was stared for the first time (see
chapter Start Operating The Receiver,
page 16).
To change the menu language, go to the menu System Setup.
Ö
Select the menu point Language.
Ö To confirm press OK.
Ö Selec
t with VOL (+/-) the desired language.
Ö
To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
To Next Page
Loading...
