SMART MX 04 - OSD Setting

System Setup
40 EN Smart MX 04
OSD Setting
Figure 11: menu for OSD Setting
To change the settings of the OSD, go to the menu System Setup – see on
page 29.
Ö
Select the menu point OSD Setting.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
Subtitle Display
Ö Select the menu point Subtitle Display in the menu OSD Setting.
Ö Select on to show the subtitles.
Ö Select off to hide the subtitles.
Ö For leaving the menu, press EXIT once or repeatedly.
OSD Timeout
Ö Select the menu point OSD Timeout in the menu OSD Setting.
Ö To confirm press OK.
Ö
Select the time how long the menu shall be displayed. The minimum is
1 second and the maximum is 10 seconds.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.