SMART MX 04 User Manual

Tools
Smart MX 04 EN 45
Factory Setting
To reset the receiver to default setting, go to the menu accessories.
Ö Select the menu point Factory Setting.
Ö To confirm press OK.
Ö Selec
t Yes if you really want to reset the receiver to default setting.
Ö Select No if you want to keep the settings of the receiver.
Ö For leaving the menu, press EXIT once or repeatedly.
SatcoDX Auto Programming
To start the SatcoDX Auto Programming, go to the menu Tools.
Ö Select the menu point SatcoDX Auto-Programming.
Ö To confirm press OK.
Ö
Start the programming with the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.
SW Upgrade by OTA
To upgrade the software of the receiver over satellite, go to the menu Tools.
Ö Select the menu point SW Upgrade by OTA.
Ö To confirm press OK.
Ö
Select the parameter Satellite, Transponder, Frequency, Symbol Rate,
Polarisation and Download PID with the PR (+/-) and VOL (+/-) buttons.
Ö
Select the menu point Start.
Ö Start the Update with the OK button.
Ö
For leaving the menu, press EXIT once or repeatedly.

SMART MX 04 Specifications

General

Brand	SMART
Model	MX 04
Category	Receiver
Language	English