SMART MX 04 User Manual

System Setup
Smart MX 04 EN 43
LNB Power
To switch the LNB voltage on or off, go to the menu System Setup – see on
page 29.
Ö
Select the menu point Other.
Ö To confirm press OK.
Ö
Select the menu point LNB voltage.
Ö Select On if there should be any voltage at the LNB IN socket.
Ö Selec
t Off if there should be no voltage at the LNB IN socket.
Channel Play Type
To change the channel type, go to the menu System Setup – see on page 29.
Ö Select the menu point Other.
Ö To confirm press OK.
Ö
Select the menu point Channel Play Type.
Ö Select Free if you only want to watch free-to-air channels.
Ö Select All if you want to watch all channels.
Ö For leaving the menu, press EXIT once or repeatedly.
Channel Change
To select the kind of change of channels, go to the menu System Setup – see
on page 29.
Ö
Select the menu point Other.
Ö To confirm press OK.
Ö
Select the menu point channel change.
Ö Select Black Screen if you want to see a black screen when switching
from one channel to another.
Ö Select Freeze if you want to see the latest picture before switching to
another channel.
Ö For leaving the menu, press EXIT once or repeatedly.
Beeper
The receiver can show the signal strength of the actual channel with a sound
signal. The stronger the signal, the higher will be the sound. This is very
helpful when adjusting the satellite antenna. The better the antenna is
adjusted to the satellite, the higher is the sound. To switch this sound signal
on or off, go to the menu System Setup – see on p
age 29.
Ö Select the menu point Other.
Ö To confirm press OK.

SMART MX 04 Specifications

General

Brand	SMART
Model	MX 04
Category	Receiver
Language	English