Operation With The Remote Control
60 EN Smart MX 04
Find A Channel
Figure 28: Find a channel
Every satellite is broadcasting hundreds of digital channels. To avoid that you
must search the whole channel memory for a certain channel, you can insert
the name of the channel with the keys and search for it.
Press Find to get the input field for the name. Insert the channel name with
the Numeric buttons (0~9). Just like on mobile phones, every numeric button
has al
so some alphanumeric functions. With pressing several times on the
same button you can select the letters with are printed on top of the Numeric
buttons
(0~9) of the remote control.
After inserting the first letter, you can see on the left side a list with channels
which begins with this letter. Press the PR (+/-) buttons and you can scroll
throug
h the channels and select the required channel. With inserting more
letters, you can narrow down the result further.
Press the VOL (+/-) buttons to move to the left or right. To add another letter,
first pre
ss the VOL-+ button. Then insert the next letter.
Press Find to switch between small and capital letters.
Press
ZOOM to delete a digit or letter.
Press
TXT to finish the input and show the selected channel.
Press
Audio or EXIT to leave the menu.
To Next Page
Loading...
Need help?
General
