SMART MX 04 User Manual

System Setup
Smart MX 04 EN 33
Ö To confirm press OK.
Ö For leaving the menu, press EXIT once or repeatedly.
RF System (only for Receivers with Modulator)
To change the color TV norm of the modulator, go to the menu System Setup
– see on page 29.
Ö
Select the menu point TV System.
Ö To confirm press OK.
Ö
Select the menu point RF System.
Ö To confirm press OK.
Ö
Select the norm for the modulator with VOL (+/-).
To be availab
le are:
• PAL-BG
• PAL-I
• PAL-DK
• NTSC
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.
RF Channel (only for Receivers with Modulator)
To change the output channel of the modulator, go to the menu System
Setup – see on page 29.
Select the me
nu point TV-System.
Ö To confirm press OK.
Ö
Select the menu point RF Channel.
Ö To confirm press OK.
Ö
Select the output channel for the modulator. Default setting is the
RF channel 38.
Ö To confirm press OK.
Ö
For leaving the menu, press EXIT once or repeatedly.

SMART MX 04 Specifications

General

Brand	SMART
Model	MX 04
Category	Receiver
Language	English