RAPS
48 EN Smart MX 04
You can see the progress of update at the status bar.
Figure 17: Selection of receivable satellites
Afterwards you can see a selection of receivable satellites.
Ö Select the satellite which you would like to receive with the
PR (+/-) buttons.
Ö
Confirm your selection with OK.
The field behi
nd the selected satellite will be checked now.
Ö Repeat these steps for all desired satellites.
Ö Finally press Vol-+ to come to the next step.
Figure 18: Selection of RAPS list
The list on the screen shows the available RAPS data.
Ö To select the ideal list, press the PR (+/-) buttons.
To Next Page
Loading...
