SMART MX 04 - Page 55

RAPS
Smart MX 04 EN 55
Ö Confirm your selection with OK.
Ö If necessary, insert the code.
Note!
The default code is "0000“.
Ö Select the menu RAPS System with the PR (+/-) buttons.
Ö Confirm your selection with OK.
Ö
Select the menu point RAPS mode with the PR (+/-) buttons.
Ö
Activate the option configure with the VOL (+/-) buttons.
Ö
Select the menu point start with the PR (+/-) buttons.
Ö
Confirm your selection with OK.
You can
see the menu fort he RAPS update on the screen.
Ö Make the RAPS settings like mentioned in chapter Install or update on
page 47.