Smartgen HGMS62 User Manual

HGMS62 Split Type Genset Controller User Manual Page 10 of 58
4 OPERATION
4.1 KEYS DESCRIPTION
Table 4 – Keys Description
Icon
Key
Description
Stop/Reset
Can stop the genset in Manual/Auto mode;
Can reset alarm in Stop mode;
Press this key more than 3s to test panel indicators are OK or not
(lamp test);
During shutdown process, press this key again can stop genset
immediately.
Start
Start genset in Manual mode.
Manual
Press this key to set the module as Manual mode.
Auto
Press this key to set the module as Auto mode.
C/O
Can control breaker close/open in Manual mode.
Set/Confirm
Press this key to enter menu interface;
Shift cursor to confirm in parameters setting menu.
Up/Increase
Screen scroll;
Up cursor or increase value in setting menu.
Down/Decrease
Screen scroll;
Down cursor or decrease value in setting menu.
Home/Return
Return to homepage when pressing this key in main interface;
Return to the previous interface when pressing this key in parameters
setting interface;
Press this key more than 3s to reset trip alarm.

Smartgen HGMS62 Specifications

General

Brand	Smartgen
Model	HGMS62
Category	Controller
Language	English