Smartgen HGMS62

HGMS62 Split Type Genset Controller User Manual Page 23 of 58
No.
Function
Size
Remarks
6
NC
Connect to ACT2 terminal of ESC.
7
ACT2
1.5mm
2
8
NC
10
ACT1
1.5mm
2
Connect to ACT1 terminal of ESC.
11
NC
9
Aux. Output 2
1.5mm
2
Relay common point.
12
Relay N/O output, rated 7A.
Connector C (Connect to charger)
1
Mains N Line Input
1.0mm
2
This terminal inside is connected with main terminal
40.
Connect to terminal N of charger.
2
Mains R Phase Input
1.0mm
2
This terminal inside is connected with main terminal
37.
Connect to terminal L of charger.
3
Charger Output +
1.5mm
2
This terminal inside is connected with main terminal
32.
Connect to charger B-.
4
Charger Output -
1.5mm
2
This terminal inside is connected with main terminal
33.
Connect to charger B-.
NOTE: USB ports are programmable parameter ports; user can directly program via PC.
7.2 HGMS62D CONTROLLER REAR PANEL
Fig.3 – HGMS62D Controller Rear Panel Drawing