SMC Networks EX245-FPS1 User Manual

- 40 -
No.EX##-OMY0004
Parameters for discrepancy between two channel input signals
Discrepancy between two input signals is evaluated in the EX245 when “1oo2” is specified.
Diagnostics information is sent when the time difference between a change of state in the two input
signals exceeds the specified discrepancy time.
The parameter specifies the maximum amount of time that should elapse between a change of state in
two inputs.
The EX245 will send a diagnostic alarm if the change of state between the two inputs does not occur
within the specified time.

SMC Networks EX245-FPS1 Specifications

General

Brand	SMC Networks
Model	EX245-FPS1
Category	Control Unit
Language	English