SMC Networks HRR012-A*-20 Series User Manual

HRX-OM-W002-A
Chapter 7 Alarm Notification and Troubleshooting
HRR Series 7.2 Alarm Buzzer Stop
7-3
7.2 Alarm Buzzer Stop
The alarm buzzer sounds to notify when the alarm signal is output.
How to stop the alarm buzzer.
 Ensure that the alarm display screen is displayed.
The alarm buzzer can only be stopped on this screen.
 Press the [RESET] key.
 The alarm buzzer is stopped.
【Tips】
・The alarm buzzer can be set not to make sound. Refer to “P.5-19 Alarm
buzzer sound”. The procedure to stop the alarm buzzer is not necessary
when the buzzer is set not to make a sound.
・If this procedure is performed when the cause of the alarm has been
eliminated before stopping the alarm buzzer, the alarm will be reset at the
same time.
▲
▼
ENT
MENU
RUN/
STOP
RESET
ALM
Alarm number
Push
▲
▼
MENU
RUN/
STOP
RESET
℃
MPa
PSI
LPM
GPM
MΩ
SEC
ALM
WRN
RUN
RMT
AT
°F
EXT
H
％
ECO
ENT
ALM

SMC Networks HRR012-A*-20 Series Specifications

General

Brand	SMC Networks
Model	HRR012-A*-20 Series
Category	Chiller
Language	English