SMC Networks HRR012-A*-20 Series - Stopping the Product

HRX-OM-W002-A
Chapter 4 Starting the Product
HRR Series 4.2 Starting and Stopping
4-5
Except in case of an emergency, do not turn OFF the breaker before
the thermo-chiller stops operation completely.
or it will cause damage to the product.
4.2.3 Stopping the product
Press and hold the [RUN / STOP] key for 1 second.
[RUN] lamp goes out and operation stops.
*It takes about 10 seconds of operation to prepare to stop before it stops.
During the stopping preparation the [RUN] lamp flashes.
Fig 4-5 Stopping the product
▲
▼
ENT
MENU
RUN/
STOP
RESET
℃
MPa
LPM
SEC
ALM
WRN
RUN
RMT
H
Flash→Lights off
RUN
Press and hold for
approximately 1
second.
▲
▼
SEL
MENU
RUN/
STOP
RESET
℃
MPa
PSI
LPM
GPM
MΩ
SEC
ALM
WRN
RUN
RMT
AT
°F
EXT
H
％
ECO