HRX-OM-W002-A
Chapter 5 Display and Setting of Various Functions
HRR Series 5.3 List of parameters
5.3.8 Reset menu
Table 5.3-8 Reset menu parameter list
1 Can only be set with air-cooled type.
2 Can only be set with option DM (Electric conductivity control function, DI water (pure water)
piping).
5.3.9 Information Monitor Setting Menu
Table 5.3-9 Information monitor setting menu Parameter list
1 Only displayed on air-cooled type.
2 Displayed when option DM (Electric conductivity control function, DI water (pure water) piping).
Initial value Select/setting range
No.1
screen
Set data reset NO NO/YES ALL⇒RESET
No.2
screen
Reset of pump operation time NO NO/YES PUMP.T⇒RESET
No.3
screen
Reset of compressor operation time NO NO/YES COMP.T⇒RESET
No.4
screen
Reset of fan operation time *1 NO NO/YES FAN.T⇒RESET
No.5
screen
Reset of dust-proof filter operation time *1 NO NO/YES FLTR.T⇒RESET
No.6
screen
Reset the DI filter operation time *2 NO NO/YES DI.T⇒RESET
Solenoid valve for electric conductivity
control Forced OPEN *2
No.1
screen
Model Cooling capacity / method XXX-X －
No.2
screen
Model Power supply / Options -DMTUY －
No.3
screen
Program number PG.NO －
No.4
screen
Program version PG.VER －
No.5
screen
Thermo-chiller accumulated operation time RUN.T H
No.6
screen
Accumulated operation time of pump PUMP.T H
No.7
screen
Accumulated operation time of compressor COMP.T H
No.8
screen
Accumulated operation time of fan FAN.T H
No.9
screen
Used time of dust filter 1 FLTR.T H
No.10
screen
Used time of DI filter 1 DI.T H
No.11
screen
Instantaneous power failureoccurrence count POW.F －
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
Display in the range of 0～1,000,000
To Next Page
Loading...
Need help?
General
