HRX-OM-W002-A
Chapter 8 Control, Inspection, Exchange and Cleaning
HRR Series 8.3 Stop for a Long Time
5. Loosen air releasing plug.Facility water will come out from facility water inlet port.
Fig. 8-4 Discharge of the facility water
6.
After draining the facility water, securely tighten the air release plug.
7.
Install the cover panel by reverse procedure. (Recommended tightening torque：1.5Ｎ・m)
Facility water outlet port
Facility water inlet port
To Next Page
Loading...
