SMC Networks HRZ002-WS-F User Manual

HRX-OM-X010
Chapter 5 System Operation
5.3 Operation Screen HRZ Series
5-22
＜ＩＮＩＴＩＡＬ ＳＥＴ＞ ↕
ＫＥＹ ＩＮ ＢＵＺＺ ＯＮ
ＡＬＡＲＭ ＢＵＺＺ ＯＮ
ＳＥＴＴＩＮＧＬＯＣＫ ＯＦＦ
5.3.20 Initial Setting screen 5
Figure 5-23 Initial Setting screen 5
Table 5-20 Initial Setting screen 5
No.
Item
Descriptions
Setting Range
Factory
Default
1
KEY IN BUZZ
Allows the setting of buzzer during key input
(Valid : ON, Invalid : OFF).
OFF,ON
ON
2
ALARM BUZZ
Allows the setting of alarm buzzer (Valid : ON,
Invalid : OFF).
OFF,ON
ON
3
SETTINGLOCK
Allow the selection of “SETTINGLOCK”
function.
This function enables to restrict the input from
operation display panel to prevent from
unintended change of setting value from
operaiton touch panel.
･ALL :
･When communication mode is “LOCAL”,
only following operations are possible.
･START/STOP.
･Setting of “SETTINGLOCK” function.
･When communication mode is
“DIO/SEREMOTE”, only following
operations are possible.
･Setting of “SETTINGLOCK” function.
･REM :
･When communication mode is “LOCAL”,
normal operation is possible.
･When communication mode is
“DIO/SER REMOTE”, only following
operations are possible.
･Setting of communication mode.
･Setting of “SETTINGLOCK” function.
･OFF : “SETTINGLOCK” function is invalid.
OFF
REM
ALL
OFF
[Tips]
[▲] or [▼] key is used for selecting “Item” and move to other Initial Setting screens.
And pressing the [ENT] key enabling to select the setting.
1
3
2
POWER ON

SMC Networks HRZ002-WS-F Specifications

General

Brand	SMC Networks
Model	HRZ002-WS-F
Category	Chiller
Language	English