HRX-OM-X010
Chapter 1 Safety
HRZ Series 1.1 Before Using this System
Chapter 1 Safety
1.1 Before Using this System
This "Safety" chapter describes the safety-related items that users should be
aware of upon handling this system.
This system, which is operated under high voltage, is outfitted with the parts
that cause a rise or drop in temperature and rotating parts when it is in action.
All personnel who work with or around this system are required to thoroughly
read and understand the safety-related items in this manual prior to working
with or around this system.
This manual is not intended to be used as a manual for comprehensive safety
and hygiene education. Such a manual should be provided by a safety training
manager.
The product is operated at high voltage and contains components which become
hot and rotate. If a component needs to be replaced or repaired, contact a
specialized vendor for parts and service.
A safety manager is responsible for observing safety standards. Operators and
maintainers, however, are to have individual responsibilies for complying with
the safety standard in his/her daily work.
Operators and maintainers must individually take account of safety and assure a
proper working area and working environment.
The relevant personnel must receive proper safety education prior to work
training on this system. Otherwise, personnel may be exposed to hazards. Never
conduct work training without giving proper consideration to safety.
Do not use the materials that rust or corrode for the circulating fluid and facility
water circuits. Using the materials that tend to rust or corrode may cause clogs
or/and leakages of the circulating fluid and facility water circuits. In case of
using these kind of materials, consider and carry out some prevention against
the rusting or corrosion on the customer side.
Save this manual at a designated place for reference when necessary.
Be sure to read and understand the important precautions defined in
this manual thoroughly prior to system use.
and t
i
portant warnings provided in
his manual thoroughly before using this system.