SMC Networks HRZ002-WS-F - Maintenance Screen 2

HRX-OM-X010
Chapter 5 System Operation
5.3 Operation Screen HRZ Series
5-28
5.3.26 Maintenance screen 2
Figure 5-29 Maintenance screen 2
Table 5-26 Maintenance screen 2
No.
Item
Descriptions
1
MONITOR
Switches to the “Maintenance ltem screen 6” with the press of
the [ENT] key.
2
AUTO PURGE
*1
Switches to the “Maintenance ltem screen 7” with the press of
the [ENT] key.
3
DI ACC RESET
*2
Switches to the “Maintenance ltem screen 8” with the press of
the [ENT] key.
[Tips]
It is displayed only if the Circulating Fluid Automatic Collector (optional) is provided
(*1).
It is displayed only if the DI Control Kit (optional) is provided (*2).
[▲] or [▼] key is used for selecting “Item.” and move to other Maintenance screens.
And pressing the [ENT] key enabling to change the setting or set value.
＜ＭＡＩＮＴＥＮＡＮＣＥ＞ ↕
４．ＭＯＮＩＴＯＲ
５．ＡＵＴＯ ＰＵＲＧＥ
６．ＤＩ ＡＣＣ ＲＥＳＥＴ
2
1
3
POWER ON