SMC Networks PFCA7 Series - Communication Error Output Data Setting

-27-
No.PF※※-OMA1002
(6) Output process data setting at communication error
Press the SET button.
Set the output process data behavior in the event of an IO-Link communication error.
Shut off: The output process data is set to "0" in the event of an IO-Link communication error.
Keep last: The output process data holds the last received data in the event of an IO-Link
communication error.
Press the SET button.
Returns to the [F0 System] settings.
Completion of the [F0 System] setting
Press the UP or DOWN button
to select an item.
Select [PD invalid].
2023-12-20 14:49
DL145266