SMC Networks ProtoCessor FPC-ED2 - Setup Web Server Security; Login to the Fieldserver; Figure 7: Web Server Security Window; Figure 8: Connection Not Private Warning

Setup Web Server Security
VorTek ProtoCessor Start-up Guide 12
5 Setup Web Server Security
Navigate to the IP Address of the ProtoCessor on the local PC by opening a web browser and entering the
IP Address of the ProtoCessor; the default address is 192.168.1.24.
NOTE: If the IP Address of the ProtoCessor has been changed, the assigned IP Address can be
discovered using the FS Toolbox utility. See Section 9.1 for instructions.
5.1 Login to the FieldServer
The first time the FieldServer GUI is opened in a browser, the IP Address for the gateway will appear as
untrusted. This will cause the following pop-up windows to appear.
• When the Web Server Security Unconfigured window appears, read the text and choose whether
to move forward with HTTPS or HTTP.
• When the warning that “Your connection is not private” appears, click the advanced button on the
bottom left corner of the screen.
Figure 8: Connection Not Private Warning
Figure 7: Web Server Security Window