SMC Networks ProtoCessor FPC-ED2 User Manual

Setup Web Server Security
VorTek ProtoCessor Start-up Guide 13
• Additional text will expand below the warning, click the underlined text to go to the IP Address. In
the Figure 9 example this text is “Proceed to 10.40.50.94 (unsafe)”.
• When the login screen appears, put in the Username (default is “admin”) and the Password (found
on the label of the FieldServer).
NOTE: There is also a QR code in the top right corner of the FieldServer label that shows the
default unique password when scanned.
NOTE: A user has 5 attempts to login then there will be a 10-minute lockout. There is no timeout
on the FieldServer to enter a password.
NOTE: To create individual user logins, go to Section 10.6.
Figure 10: FieldServer Login
Figure 9: Warning Expanded Text

SMC Networks ProtoCessor FPC-ED2 Specifications

General

Brand	SMC Networks
Model	ProtoCessor FPC-ED2
Category	Control Unit
Language	English