8
Introduction Power Supply
2.4.1 DC Power Input
The DC power input can be used to power the unit via an AC/DC power supply. For related
information, see the following sections:
• “AC/DC Power Supply” on page 9
• “Connecting the AC/DC Power Supply” on page 14
2.4.2 USB Port
This scan tool has a USB port for connecting to a printer.
2.4.3 Mini USB Port
The mini USB port on top of the unit is used for updating the internal software, and for
transferring saved files to a personal computer.
2.4.4 Data Cable Connector
The data cable connector is used to connect the scan tool to a vehicle data link connector
(DLC) for testing.
For related information, see the following sections:
• “93L Data Cable” on page 10
• “Connecting to Vehicle Power” on page 12
2.4.5 CompactFlash
®
Card Slot
The CompactFlash
®
(CF) card slot, located under the handgrip, adds optional functionality to
the scan tool. The ETHOS unit does not require a CF card to operate. The CF card slot on the
scan tool is used for creating a backup file of the operating system and for accessing certain
update functions.
2.5 Power Supply
This scan tool can receive power from three sources:
• Vehicle power
• Battery power
• AC/DC power supply
For related information, see “Vehicle Power” on page 9.
To Next Page
Loading...
Need help?
General
