34
Operations Using Tools
5.6.2 Units
Select Units to choose between US customary or metric units of measure for certain data
parameters.
z To change units:
1. Select Units.
A list of choices displays with the current settings shown in brackets (Figure 5-20).
Figure 5-20
Sample Units menu
2. Highlight a menu item and press Y/a.
A selection menu opens.
3. Highlight the desired setting and press Y/a.
4. Press N/x to return to the main menu.
5.6.3 Setup
The Setup menu includes the following options:
• Printer—configures the scan tool to communicate with a printer through the USB port.
• Time Zone—sets the internal clock.
• Daylight Saving—modifies the internal clock for daylight savings time.
• Battery Type—sets low battery warning message threshold for disposable or
rechargeable batteries.
• Brightness—opens a widow for adjusting the backlighting on the display screen.
Table 5-1
Units of measurement—defaults and options
SETTING DEFAULT OPTION
Temperature degrees Celsius (°C) degrees Fahrenheit (°F)
Air Pressure
(including manifold
pressure)
kilopascals (kPa) inches of mercury (“Hg)
Pressures
(all others)
kilopascals (kPa) pounds per square inch (psi)
Vehicle Speed kilometers per hour (kph) miles per hour (mph)
i
SetupUnitsS
Tools Menu
Temperature
Air Pressure
Pressure (all others)
Vehicle Speed
Sys
[[°F]]
[kPa]
[kPa]
[KPH]
[°F]
[°C]
To Next Page
Loading...
Need help?
General
