Snom 320 - Page 75

snom technology AG • 75
[ SNOM 320 USER MANUAL V1.00 ]
Ringtone defaults
Ringer Device for Headset: If you want to hear the ring tone via
the headset only, choose “headset”; otherwise, “speaker”.
Default Ringer: Choose the default ringing melody for your snom
phone through this setting.
Address Book Ring Tones
Specify the ringing melodies for different contact types of your
personal phone book entries (e.g.., “friends”) by choosing a ringer from
the respective pull-down menu.
Custom Melody URL: If you have chosen Custom Melody URL in
one of the pull-down menus, you can specify an URL to your own ringing
melody. The type of fi les that should be supplied to the phone are: “PCM
8 kHz 16 bit/sample (linear) mono WAV”.
AUTO ANSWER
snom phones have auto-answering capabilities. Through these
settings you control the behavior of auto answer.
Auto answer for the seven lines on your phone is turned on or
off on the “Confi guration Line 1-12” pages, tab “SIP”. “Auto answer
indication” and “type of answering” will only affect your phone when auto
answer is on.
Auto Answer Indication: If you want to be informed with an
audible indication when an incoming call is automatically answered by
your phone, select “on”.
Type of Answering: Select how you want to receive the incoming
call, i.e., in handsfree mode, on the headset, or on the handset.
6