Snom 320 - Page 92

92 • Settings
[ SNOM 320 USER MANUAL V1.00 ]
conference calls or in handsfree-mode, etc. This is achieved by turning
this setting off.
Call join on Xfer: When this feature is turned to “on”, you will
connect an incoming call to, for example, a colleague you already have
on hold by pressing
. You will not be able to pick one of severals calls
on hold to transfer the call to. If this is what you normally want to do,
set this feature to “off” and select the calls to be joined! Press and
to join them.
Alert info playback: If you want your phone to replay audio system
messages when they are provided, set this option to “on”. Additionally,
you will see a message on the display. When you set the option to “off”,
you will only see the message on the display.
AOC Amount Display: If your provider supports “Advice of Charge”
(AOC) information (i.e., the costs for your call) during or at the end of the
call, you can turn on this feature by selecting one of the following options:
Select “Charged” to show the accumulated amount of the current call
on the display; select “Balance” to show the amount remaining on your
account.
AOC Pulse currency: Sets the currency symbol that will be shown
next to the amount (e.g., $).
AOC Cost/Pulse: Specify how much money one pulse costs (e.g.,
0.12 means 12 cents per pulse)
Keys
Here you can change the key behavior on the phone to suit your
wishes. The webpage subsection may look like this:
Transfer on Onhook: If you do not want calls to be transferred
when you place the receiver on the hook, you can switch it off here.
6