13
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
CE CERTIFICATION 1.4
If applicable, the machine is accompanied by a certificate declaring that it complies with the applicable
European directives and any technical regulations adopted during its construction.
In attachment I of this section there is a facsimile of the Declaration of Conformity.
OPERATOR TRAINING 1.5
DRIVING ABILITY 1.5.1
The vehicle must only be used by qualified and authorised staff; the minimum training
requirements are:
• a driving license for circulating on roads in the country where the machine is to operate;
• a license for operating a crane or a forklift truck or a participation certificate for courses in
operating telescopic handlers.
The operator must be able to read and understand what is described in this manual, especially:
• operation of the safety devices fitted to the machine;
• the location and the function of all controls and instruments; the rules for using the machine
correctly;
• the operating limits of the machine;
• what not to do and what to avoid doing.
MACHINE IDENTIFICATION 1.6
TECHNICAL NAME 1.6.1
The machine referred to in this manual can be defined as a “Self-propelled truck with a telescopic boom
and interchangeable lifting tool.”
The models have different heights and lifting capacity values; the characteristic of each model is defined by its
load diagram.
To Next Page
