EasyManua.ls Logo

Snorkel SR9244 - Adjusting the Drivers Seat

Snorkel SR9244
196 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
31
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
www.snorkellifts.com
ADJUSTING THE DRIVER'S SEAT 2.10.2
The lever on the left of the driver's seat (subsequently marked with
G) unlocks the backrest that is pushed forward by a spring inside the
seat itself. Resisting with your back adjusts its position. The seat has
an adjustable safety belt. The headrest is height-adjustable.
AIR SUSPENSION SEAT
Pulling or pushing the latch (A) in the seat with air suspension
adjusts the strength of the suspension according to the weight of
the operator. The lever at the base of the seat (B) adjusts the
height of the seat. Pull the lever (C) on the front left side of the
seat to move the seat forward or backward to the desired position.
SPRING SUSPENSION SEAT
Turn the latch (D) in the seat with spring mechanical suspension to
adjust the height of the seat. The strength of the suspension is
adjusted by rotating the lever (E) at the base of the seat. The force
of the suspension can be adjusted this way for operators ranging
from 50 to 120 kg. Pull the lever (F) on the front left side of the
seat to move the seat forward or backward to the desired position.

Table of Contents