19
Model: Snorkel SR9244 SR1054
Part Number: 159-0037-000
Snorkel International, LLC
2009 Roseport Road
Elwood, KS 66024
HYDRAULIC SERVICES SYSTEM 1.9.6
The system consists of the following parts:
• Gear pump with 51 cm
3
displacement.
• Maximum operating pressure 230 bar.
DIFFERENTIAL AXLES 1.9.7
• Industrial type with epicycloidal reducers and integrated multi-disk brakes in oil bath.
• Front differential with 45% limited slip differential type.
DIESEL ENGINE 1.9.8
The machines are equipped with:
• DEUTZ diesel engine with 74,4kW or 100 kW power STAGE_IV / Tier4 Final emission level
Single-speed version: transfer speed up to 30 km/h.
COOLING SYSTEM 1.9.9
Air heat exchanger divided into three sections:
• One to cool the coolant liquid of the diesel engine
• One to cool the oil of the hydraulic circuit
• One to cool the turbocharger air
TIRES 1.9.10
The machines can be fitted with the following tIres (recommended):
• 405/70 – 20” Load index 149B (MITAS), 158 A8 (CAMSO) SR9244 only
• 405/70 – 24” Load index 152B (MITAS), 151D (CEAT), 169 A2 (CAMSO) SR9244 only
• 445/65 R22,5 Load index 169F (AEOLUS)
ATTENTION!
The tires in this manual refer to those recommended by the manufacturer.
If they are to be replaced with a different brand of tires, please refer to the dimensions and load index in
this manual.
In this case, the tire’s operating pressure shall be the maximum recommended by the tire manufacturer.
The pressure indicated on the label, which is on the mud flap, ONLY refers to the first equipment tire
mounted by the manufacturer.
To Next Page
