socomec DIRIS Digiware C-31 Installation

2 EN
DIRIS DIGIWARE DC - 545830B - SOCOMEC
1. DOCUMENTATION .............................................................4
2. HAZARDS AND WARNINGS ....................................................5
2.1. Risk of electrocution, burns or explosion ................................5
2.2. Risk of damaging the unit .............................................5
2.3. Responsibility ........................................................6
3. PRELIMINARY OPERATIONS ....................................................7
4. INTRODUCTION ...............................................................8
4.1. Introduction to DIRIS Digiware DC .....................................8
4.1.1. Range ....................................................9
4.1.2. Principle ..................................................10
4.1.3. Functions .................................................12
4.1.4. Electrical readings .........................................13
4.1.5. Dimensions ...............................................15
4.2. Current sensors .....................................................16
4.2.1. Current sensors interface ...................................16
4.2.2. Connection cables for current sensors ........................17
4.2.3. Current sensors ...........................................17
5. MOUNTING ..................................................................18
5.1. Recommendations and safety ........................................18
5.2. DIRIS Digiware mounting .............................................18
5.2.1. DIRIS Digiware C, U-3xdc, I-3xdc, IO-x - DIN rail-mounted. . . . . . .18
5.2.2. DIRIS Digiware C, U-3xdc, I-3xdc, IO-x - backplate-mounted ....19
6. CONNECTION ................................................................20
6.1. DIRIS Digiware connection without voltage adapter .....................20
6.2. DIRIS Digiware connection with voltage adapter ........................22
6.3. Description of the terminals ..........................................25
6.4. Connecting the current sensors .......................................26
6.4.1. Connection concept .......................................26
6.4.2. Calibrating the current sensors ..............................27
6.5. Connection to the electrical network and to the loads ...................27
6.5.1. Description of the association of DC network and loads .........28
6.5.2. Connection of the functional earth ............................30
7. DIGIWARE BUS ...............................................................31
7.1. Principle ...........................................................31
7.1.1. Digiware Bus connection cables .............................31
7.1.2. Digiware Bus Termination ...................................32
7.2. Sizing of the power supply ...........................................32
7.2.1. Equipment consumption ....................................32
7.2.2. Calculation rules for the max. number of products on the Digiware BUS ..33
7.2.3. Digiware bus repeater ......................................33
8. STATUS AND AUTO-ADDRESSING LEDS .......................................35
8.1. Status LEDs ........................................................35
8.2. Auto-addressing ....................................................35
9. COMMUNICATION ............................................................37
9.1. General information .................................................37
9.2. RS485 and Digiware Bus rules ........................................37
9.2.1. Connection with the DIRISDigiwareC-31 system interface module ...38
9.2.2. Connection with the DIRISDigiwareD-50/D-70 remote display ...38
9.2.3. Connection with the DIRISDigiwareD-40 remote display ........39
9.3. Communication tables ...............................................39
10. CONFIGURATION ............................................................40
10.1. Configuration using Easy Config .....................................40
10.1.1. Connection modes .......................................40
10.1.2. Using Easy Config ........................................41
10.1.3. Synchronisation of products ................................44
10.2. Configuration from the DIRIS Digiware D remote display ................44
10.2.1. Connection mode ........................................44
EN
CONTENTS

socomec DIRIS Digiware C-31 Specifications

General

Brand	socomec
Model	DIRIS Digiware C-31
Category	Measuring Instruments
Language	English