8 EN
DIRIS DIGIWARE DC - 545830B - SOCOMEC
4. INTRODUCTION
4.1. Introduction to DIRIS Digiware DC
DIRIS Digiware DC is a measuring system (PMD*) with modular format. It is designed for measuring and monitoring
continuous electrical energy (DC). DIRISDigiware DC offers a range of functions for measuring voltage, current,
power, energy and quality. It can be used to jointly analyse DC loads.
DIRIS Digiware DC is an innovative concept based on centralising the voltage measurement and distributing the
current measurement close to the loads. The voltage is measured by a dedicated DIRIS Digiware U module and
the current by dedicated DIRIS Digiware I modules. The voltage and current measurements are interconnected by
the Bus Digiware. On DIRIS Digiware I modules, three current inputs are available, enabling one or several loads
to be monitored simultaneously. Several modules may be connected to the Digiware bus. This approach offers the
possibility of characterising a high number of loads from a single voltage tap.
Cabling is made simple by a single voltage measurement connection. The connection mode for the current sensors
also allows quick and easy installation.
The DIRIS Digiware DC system is congured from its remote display or via the Easy Cong software. The
measurements can be accessed via the WEBVIEW web server integrating the monitoring function for electrical
values (Power Monitoring version) and reporting function for energy data (Power & Energy Monitoring version).
WEBVIEW is available on DIRIS G communication gateways and the DIRIS Digiware D-70 display.
Thanks to its architecture, DIRIS Digiware DC can be easily integrated into an energy management system which
requires a large number of loads to be monitored.
*PMD: Performance Measuring and Monitoring Device in accordance with IEC 61557-12.
To Next Page
Loading...
Need help?
General
