HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
3. Tighten the connecting nut.
Figure. 5-41 Install WiFi stick
5.13.1 Configuration of the WiFi stick via the web browser
Preparation: The WiFi stick is installed in accordance with the
previous section and the SOFAR inverter must be in operation.
Carry out the following steps in order to configure the WiFi stick:
1. Connect your PC or smartphone with the WiFi network of
the WiFi stick. The name of this WiFi network is “AP”,
followed by the serial number of the WiFi stick (see rating
plate). When you are prompted for a password, you can find
it on the label of the WiFi stick (PWD).
2. Open an Internet browser and enter the address
10.10.100.254.
（Recommended browsers: Internet Explorer 8+, Google Chrome 15+, Firefox 10+）
3. Enter the username and password, which are both set to
“admin” by default. The “Status” page will be opened.
4. Click on the “Wizard” in order to configure the WiFi stick for
Internet access.
Result :The WiFi stick begins to send data to SolarMAN.
Register your system at the website home.solarmanpv.com. For
this, enter the serial number found on the stick logger.
Installers use the portal at pro.solarmanpv.com
5.13.2 Setting up the WiFi stick with the app
To download the app, search for “SOLARMAN” in the Apple or
Google Play store, or use the following QR codes:
To Next Page
Loading...
