HYD 5/6/8/10/15/20KTL-3PH USER MANUAL
When the local power grid is unstable or generators are used.
7.3.7 Manual Genset Mode
(energy storage mode → generator mode)
Applicable scenario 2 : Users want to manually switch the power
grid and generator. When the power grid is powered off, the
generator is manually started. When the power grid is restored,
the generator is manually closed and connected to the power
grid.
Scenario 2：The user manually controls the start and stop of the
generator
Figure. 6-4 Schematic diagram of Genset Mode
1. Connect according to the wiring diagram. The address of
Chint electricity meter is set to 01, and the address of Ankeri
electricity meter is set to 05 （ If you need to configure other
meters, please contact us for specific adaptation
）
2. Select energy storage mode in the menu → Manual generator
mode → Set generator input power
3. The user manually starts the generator
4. When the user wants to switch off the generator to battery
power supply and grid power supply, he needs to manually turn
off the generator and select other energy storage modes
To Next Page
Loading...
