Decommissioning
57
The chapter is only for reference. The exact maintenance should
be according to the guide provided by the battery manufacture.
NOTE!
• Disconnect the inverter from DC input and AC output.
• Disconnect battery wiring.
• Wait for 5 minutes for de-energizing.
• Disconnect communication and optional connection wiring.
• Remove the inverter from the bracket.
9.1 Dismantling the Inverter
9 Decommissioning
If possible, please pack the inverter with the original packaging.
If it is no longer available, you can also use an equivalent carton that meets
the following requirements.
• Suitable for loads more than 25 kg.
• With handle.
• Can be fully closed.
9.2 Packaging
Store the inverter in dry place where ambient temperatures are always between
-20 °C - +60 °C.
9.3 Storage
When the inverter or other related components need to be disposed. Have
it carried out according to local waste handling regulations. Please be sure to
deliver wasted inverters and packing materials to certain site, where can assist
relevant department to dispose and recycle.
9.4 Disposal
● Battery
The X-hybrid series inverter is compatible with both lead-acid and lithium battery.
Either type of the battery needs to be maintained every month /quarter/ year
according to different types and requirement of the battery.
If the capacity of the battery decreased to lower than 80% of the rated capacity,
the battery should be replaced.
To Next Page
Loading...
Need help?
General
