2.3 Explanation of Symbols
This section gives an explanation of all the symbols shown on the inverter and
on the type label.
During operation, the upper lid of the enclosure and the
enclosure body may become hot.
• Only touch the lower enclosure lid during operation.
CAUTION!
DANGER OF BURN INJURIES DUE TO HOT ENCLOSURE PARTS!
• Do not stay closer than 20 cm to the inverter for any length of time.
CAUTION!
POSSIBLE DAMAGE TO HEALTH AS A RESULT OF THE EFFECTS
OF RADIATION!
NOTE!
Symbols on the Inverter
Symbol Explanation
Operating Display.
The battery is in charging or discharging.
Communication is active.
An error has occurred, please inform your installer immediately.
Symbols on the Type Label
Symbol Explanation
CE mark.
The inverter complies with the requirements of the applicable CE guildlines.
Grounding the PV generator.
Comply with the local requirements for grounding the PV modules
and the PV generator. SolaX recommends connecting the generator
frame and other electrically conductive surfaces in a manner which
ensures continuous conduction and ground these in order to have
optimal protection of the system and persons.
To Next Page
Loading...
Need help?
General
