7 • Technical Data
________________________________________________________________________________________________
Options
Analog output (see details below)
Thermistor input (see details below)
Motor insulation test (see details below)
Preparation for bypass - to maintain
protection when bypass is closed
Special anti-corrosive treatment - special coating
for harsh environments
Special tacho feedback circuitry
Modbus RTU - enables setting, control &
supervision
Profibus DP – enables setting, control &
supervision
Analog Card (Optional)
Incorporates two functions:
Thermistor input, PTC or NTC
Analog output, related to motor's current,
programmable as 0-10VDC, 4-20mA, 0-20mA or
inverse (inverse available in RVS-DN 1000V& RVS-
DN1200V models)
Motor Insulation Tester (Optional)
A unique feature for submersible pumps, motors
installed in harsh environments, etc.
The system measures motor insulation when motor is
not running.
Two programmable levels are available:
Alarm level, adjustable 0.2-5 Mohm
Start disable level, adjustable 0.2-5 Mohm,
preventing starting when insulation is below
acceptable levels
Auxiliary Relays
Three standard programmable relays (each relay with
one C.O. 8A, 220VAC contacts)
Immediate with adjustable on and off delays.
Can be dedicated for shear-pin (jam) protection
End of acceleration, with adjustable on delay
Fault, programmable as fault or fault-fail safe
operation.
Low motor insulation alarm (optional relay)
Applications - Industrial
Pumps
Hydraulic systems
Fans and blowers
Compressors
Conveyors
Applications - Marine & Offshore
Water, ballast and fire-fighting pumps
Refrigeration chillers and compressors
Hydraulic pumps and power packs
Thrusters
Main propulsion motors
Unique protection for corrosive environments
Generator ready - auto frequency tracking
Sustains variations of 45-65Hz while starting
Heavy duty, fully rated design
Applications - 1000V &1200V for Mining,
Quarries & Mixers
Digital Soft Starter for 105-460A, robust, heavy
duty, fully featured, fiber-optically controlled
(210-460A)
Stainless steel with copper heatsink is available
below 100A – consult factory for details
The RVS-DN has Lloyds Type Approval for
ENV1, ENV2. As well as, Germaniche Lloyds,
Rina and DNV - consult factory for details
To Next Page
Loading...
Need help?
General
