Solcon RVS-DN 8 User Manual

86 • Control Keypad
_____________________________________________________________________________________________
COMM.PARAMETERS
- **** -
Displays in MAXIMIZED MODE only
(refer to section 6.5.1 page 56 for changing mode)
Display and Default
Values
Range Description
MODBUS TIME OUT
OFF
Do not change this parameter! Must be set to OFF.
FRONT COM ADDRES
OFF
OFF,1 – 247 Future enhancement
STORE ENABLE
COMM. PARAMETERS
Notes:
(1) Same as STORE ENABLE MAIN PARAMETERS on page 71.
(2)
After changing communication parameters and storing them, control power
must be switched off and on to load new communication parameters.
7.7.11 Statistical Data – page 9
STATISTICAL DATA
- **** -
Displays in MINIMIZED MODE and MAXIMIZED MODE
Display and Default
Values
Range Description
LAST STRT PERIOD
NO DATA
Displays last starting time in seconds.
Starting time is the duration until motor current drops to
nominal.
LAST STRT MAX I
NO DATA
Displays last starting maximum starting current.
TOTAL RUN TIME
0 HOURS
Displays the motor’s total run time.
TOTAL # OF START
0
Displays the total number of starts.
LAST TRIP
NO DATA
Displays the cause of the motor’s last trip.
TRIP CURRENT
0 % OF FLA
Displays motor current when the motor was tripped by the
RVS-DN.
TOTAL # OF TRIPS
0
Displays the total number of trips.
PREVIOUS TRIP -2
NO DATA
.
.
.
.
.
.
.
.
.
.
.
.
PREVIOUS TRIP -9
NO DATA
Displays motor trip history.

Solcon RVS-DN 8 Specifications

General

Brand	Solcon
Model	RVS-DN 8
Category	Controller
Language	English