Pro Tools Setup Notes
To set up timecode generation: Windows/Show Session Setup
Select the MTC option and select the port on the MIDI interface that is connected to AWS Port 4 MIDI IN. Also
select the timecode rate for the session and the session start time. It is expedient to make a note of the timecode
standard that was used for a particular AWS mixing project. AWSomation automatically detects the
timecode standard from the incoming MTC messages. It will quite happily attempt to play out stored mix data to
incoming timecode with a different frame rate, but this will result in small but potentially annoying timing errors in
automation playback.
To set up MMC locates: Setups/Peripherals
AWS 900+ Owner’s Manual
7-13
AWSomation
To Next Page
Loading...
