Solid State Logic AWS 900+ - Page 140

Troubleshooting Chart – Centre section
Problem
Check
Solution
Motion Control Panel does
not function.
Is the connector labelled IN on the Motion
Control Panel seated correctly?
If no, re-seat as required.
Workstation Panel does
not function.
Is the connector labelled WSINOUT on the
Workstation Panel seated correctly?
If no, re-seat as required.
Is the connector labelled WSINOUT on the
Motion Control Panel seated correctly?
If no, re-seat as required.
Monitor Panel does not
function.
Is the connector labelled MONINOUT on
the Motion Control Panel seated correctly?
If no, re-seat as required.
Is the connector labelled MONINOUT on
the Monitor panel seated correctly?
If no, re-seat as required.
GPIO port does not
function.
Is the connector labelled PL2 on the
Motion Control Panel seated correctly?
If no, re-seat as required.
Is the connector labelled MONINOUT on
the Motion Control Panel seated correctly?
If no, re-seat as required.
Is the connector labelled MONINOUT on
the Monitor Panel seated correctly?
If no, re-seat as required.
Video Display does not
function.
Remove Workstation Panel. Remove
display panel. Is the 30-pin ribbon
connector seated correctly?
If no, re-seat as required.
Is the connector labelled DVIDEO2 on the
CPU card seated correctly?
If no, re-seat as required.
Centre Section meter does
not function.
Is the connector labelled IN on the Meter
Panel seated correctly?
If no, re-seat as required.
Is the connector labelled PL11 on the
CPU seated correctly?
If no, re-seat as required.
AWS 900+ Owner’s Manual
A-17
Troubleshooting