SOLIS S6 Series - User Manual

Other manuals for SOLIS S6 Series

Installation And Operation Manual29 pages

Manual50 pages

Questions and Answers

V
vmclaughlinSep 13, 2025
What is 'LmtByVar' on my SOLIS S6 and how do I handle it?
- A
  Ann HudsonSep 14, 2025
  The 'LmtByVar' message on your SOLIS Inverter is triggered by local safety regulations when the grid voltage is high, activating Volt-watt working mode. Generally, this does not require intervention. However, if it's due to a factory test error, you can disable this mode via the LCD: Main menu ? Advanced Settings ? Password 0010 ? STD mode settings ? Working Mode ? Working mode: NULL ? Save and exit.
F
Felicia RomeroSep 14, 2025
What does 'LmtByEPM' mean on my SOLIS S6 and how can I resolve it?
- G
  Gabrielle ChapmanSep 14, 2025
  If your SOLIS Inverter displays 'LmtByEPM', confirm whether the inverter is connected to an external EPM/meter to prevent reverse current. Also, check if the inverter is controlled by an external third-party device and confirm whether the power setting of the inverter power control is limited. Verify settings in section 6.6.7 and check your meter readings.
K
Kyle HarrisSep 14, 2025
What does 'DCInj-FAULT (1037 DATA:0000)' mean on my SOLIS S6 Inverter and how to resolve it?
- J
  jsanchezSep 14, 2025
  If your SOLIS Inverter displays 'DCInj-FAULT (1037 DATA:0000)', confirm that the grid is not abnormal and that the AC cable connection is normal. If the problem continues, restart the system.
A
anne41Sep 14, 2025
How to fix grid overvoltage on SOLIS S6?
- J
  Jonathan HarrisSep 14, 2025
  If your SOLIS Inverter is showing a grid overvoltage error, make sure the grid is correctly connected and then wait for the grid to return to normal operating levels.
R
Rebekah BellSep 15, 2025
What to do if my SOLIS S6 shows grid undervoltage?
- K
  Kelly MurraySep 15, 2025
  If your SOLIS Inverter displays a grid undervoltage error, verify the grid connection is correct and wait for the grid voltage to stabilize within the normal range.
D
Derrick McculloughSep 15, 2025
How do I resolve grid overfrequency on my SOLIS S6 Inverter?
- J
  Jacob KingSep 15, 2025
  In the event of a grid overfrequency error on your SOLIS Inverter, check the grid connection to ensure it is correct, and wait for the grid frequency to return to normal.
C
Carmen MeyerSep 15, 2025
What to do if SOLIS Inverter says battery not connected?
- N
  nrodriguezSep 15, 2025
  If the SOLIS Inverter displays that the battery is not connected, verify that the battery is correctly connected and that the battery contactor is not disconnected. Restart the battery after checking the connections.
J
jackson41Sep 15, 2025
How to troubleshoot battery overvoltage on SOLIS S6?
- J
  Jeffrey MooreSep 16, 2025
  If you are experiencing a battery overvoltage error with your SOLIS Inverter, check if the battery overvoltage setting is reasonable. Also, determine if the battery has reached its end of life.
D
Daniel HartmanSep 16, 2025
How to fix AC transient overcurrent on SOLIS S6?
- J
  josephperezSep 16, 2025
  If your SOLIS Inverter is showing an AC transient overcurrent error, check if the backup port is shorted and restart the inverter.
J
Julie FisherSep 16, 2025
What to do for bypass overload fault on SOLIS S6?
- A
  Amy Lopez MDSep 16, 2025
  If your SOLIS Inverter is showing a bypass overload fault: 1. Check if the load of the backup port exceeds the rating output power. 2. Reduce the load of the backup port, and then restart the inverter.

SOLIS S6 Series Specifications

General

Number of MPPTs	2
THDi	<3%
DC Switch	Yes
Max. AC Output Power	6000W
Rated AC Output Power	6000W
Max. AC Apparent Power	6000VA
Rated Grid Voltage	230V
Grid Voltage Range	180V-280V
Rated Grid Frequency	50Hz/60Hz
Grid Frequency Range	45-55Hz / 55-65Hz
Protection	DC Reverse-Polarity Protection, AC Short-Circuit Protection
Operating Temperature Range	-25°C to 60°C
Cooling	Natural Cooling
Communication	WiFi/GPRS