Sony Ericsson C902 - Antenna Cover Assembly

Working Instruction Repair Instruction Mechanical/,
Mechanical
1212-7760 State: Preliminary 8.1
Company Internal
© Sony Ericsson Mobile Communications AB
10(66)
2.1.4 Antenna Cover Assembly
Use torx bit no. 6 to remove these two 1,6 x 6,1 screws.
T
HE TWO 1,6 X 6,1 SCREWS MUST BE SCRAPPED, CANNOT BE
REUSED
!
Use the PH00 bit to remove this Flat Head Screw,
and the second one on the opposite side.
T
HE TWO SCREWS MUST BE SCRAPPED, CANNOT BE REUSED!
Insert the Guitar Pick as shown in picture to unlatch the
Antenna Cover Assembly at this side,