M600i Phone 23
This is the Internet version of the user guide. © Print only for private use.
Managing Two or More
Calls
You can manage multiple calls at the same
time, as follows:
• Put an ongoing call on hold, then make a
new one or answer an incoming call.
• Start a conference call during an ongoing
call (mobile network operator-dependent).
• Put the conference call on hold, while
isolating one party of the call for a private
exchange.
• Make a call using another line (if you have
the ALS service on your SIM card). See
ALS Settings on page 69.
• Retrieve or hang up an on-hold call.
Conference calls
You can start a
conference call
when you have one
active call and one
on hold. Select
Start conference
call
from the More
menu to start the
call. The maximum
number of
conference parties
is five.
Note: Conference calls are only available if
they are supported by your mobile network
operator.
Call Log
The Call log application makes a log entry for
all your calls.
Here, you can find call
information, such as the call type, time, date,
phone number, and call length.
You can also make phone calls and notes
directly from the log.
Features
Setting up speed dial numbers
Speed dial numbers are represented by number
keys to and are used to reach your
nine Speed contacts from the keyboard. To set
up your Speed contacts, see Creating a speed
contact on page 32.
Controlling tone-based services
You can use your phone for phone banking
services or other tone-based services that use
DTMF (Dual Tone Multi Frequency).
Send tones during a call, as follows:
• Press the keyboard keys during an active
call.
• Include a tone sequence when dialing.
• Use digit sequences stored in Contacts
entries.
Anne Shu
Peter
2
1
3
Conference
MoreHold End call
01:2512:20
ER
N M
To Next Page
