M600i Control Panel 75
This is the Internet version of the user guide. © Print only for private use.
Active after determines the length of the
period of inactivity before turning off the
screen.
Screen saver
Select Tools > Control panel > Device >
Screen saver
to select a screen saver. You can
select the default screen saver, an image, or a
folder of images for use as a slideshow.
Sounds & Alerts
Ringtones
Select Tools > Control panel > Device >
Sounds & alerts > Ringtones
to choose
ringtones from the drop-down menus for
incoming voice and data & fax calls. Tap and
drag the volume slider or rotate the Jog Dial to
adjust the ringtone level. To preview a sound
tap . If you select
Increasing ring, the ring
signal will begin at a low level, then gradually
increase in volume.
You can further customize your phone by
assigning different ringtones to different
contacts (see Adding a personal ringtone to a
contact on page 31).
Message alerts
Select Tools > Control panel > Device >
Sounds & alerts > Message alerts
to choose
sounds to play when you receive different
kinds of messages. If you select
Display
notification
, a dialog will display on the
screen when a message arrives.
Alarms
Select Tools > Control panel > Device >
Sounds & alerts > Alarms
to choose sounds
and adjust the volume of Calendar and Clock
alarms. Alarms require that the phone is turned
on. If you want to hear alarms, but not be
disturbed by incoming calls or messages, set
the phone to Flight mode.
Vibrating alerts
Select Tools > Control panel > Device >
Sounds & alerts > Vibrating alerts
, then
choose the events for which you want the
phone to vibrate.
On if silent indicates the
phone will vibrate only when the silent mode
has been activated. For more information, see
Silent mode on page 19
Buttons & screen
Select Tools > Control panel > Device >
Sounds & alerts > Buttons & screen
to
choose sounds that play when you press keys
and buttons or tap the screen.
To Next Page
Loading...
