68 Control Panel M600i
This is the Internet version of the user guide. © Print only for private use.
After 5 seconds – the phone answers
automatically after five seconds.
Always route answered calls to
Bluetooth
– mark the check box to route
answered calls to a Bluetooth headset.
Reject with SMS
If you want to reject a call (for example, during
a meeting), you can set up your phone to send
a predefined SMS message to the calling party.
Select
Tools > Control panel > Call settings >
Reject with SMS
to enter the settings. If this
feature is enabled when you reject a call, the
phone will ask if you want to send an SMS text
message.
Restrict Calls
This feature allows you to enable or disable
certain types of calls on your phone (for
example, international calls). You need a
special PIN code from your mobile network
operator to enter the settings in
Tools >
Control panel > Call settings > Restrict calls
.
Show or Hide Number
You can choose whether you want the party
you are calling to see your phone number.
Select
Tools > Control panel > Call settings >
Show or hide number
to enter the settings.
Marking
Network default leaves the decision
to your mobile network.
TTY Settings
You can enable the use of a teletypewriter; an
aid for deaf and speech-impaired people.
Connect the TTY device to the accessories
connector at the base of your phone.
Voice Control
You can dial and receive calls using voice
commands. Select
Tools > Control panel >
Call settings > Voice control
to enter the
settings.
Recording voice commands
Before you can enter any settings in this
dialog, you must have previously recorded the
voice command words for Answer, Busy, and
the Magic word.
You must say the Magic word before
command words to tell your phone to 'start
listening' for commands. Choose a long,
unusual word, which is easily distinguishable
from ordinary background speech.
Select
More > Edit > Record to record a
highlighted voice command. Select
More >
Edit > Play to listen to a highlighted command.
To Next Page
